Megasat HD 500se Benutzerhandbuch Seite 15

Operation
Multi-Satellites Scan: Press OK to select satellites, then press blue to pop the menu of scanning
setting. After Configuring like single satellite scan, press OK to start multi-satellites scan.
Blind Scan: First scan the band to get the transponders which can be locked. After gathering all
Transponders, Scan the transponders one by one to get the programs.
DB Managment: Backing up your channel list or to load list.
Unicable Konfiguration:
Unicable enables the delivery of broadcast programming to multiple users over a single coaxial
cable. It should work with Unicable LNB or SaTCR equipment. Set the Unicable ON, and select a
channel which isn't occupied by other users. Dish setup with Unicable When unicable activated,
the DiSEqC1.0, DiSEqC1.1, DiSEqC1.2,DiSEqC1.3 are disabled. Set Pos A/B for satellites if the equip-
ment can support.
Time Setting
To access the Menu, press MENU then select [Time]. The Menu provides options to adjust the time
settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings. Press
EXIT to exit the menu.
1. Time Auto: update time with the stream time, or NOT.
2. Time Zone: Select the Time Zone Offset.
3. Date: show and set the system date.
4. Time: show and set the system time.
5. Sleep: If this setting is off, this function does not work. If this setting is not off, a message will pop
up after your preferred time to inform you, that the device will go in to sleep mode. This message
will appear under no any operation. Auto-off function can be set in a time period at 0-12 hours.
Standard setting is off. Press STANDBY button to exit sleep/auto-off mode.
Optionen
To access the Menu, press MENU and select [Option]. The menu provides options to adjust the
OSD Language, Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to
adjust the setting. Press EXIT to exit the Menu.
1. OSD Language: Select an OSD language.
2. Audio Language: Select the preferred audio language for watching TV channels. If the language
is not available, the default program language will be used.
3. Subtitle Language: Select the preferred subtitle language.
4. Digital Audio set output mode of Digital Audio.
5. Banner Time set the period of banner auto disappearing.
ENGLISH
12
Operation
System settings
Set password
Set or change the password for locked programs. Enter your old password or the default password
‚000000' . You will then be asked to enter your new password. To confirm re-enter your new pass-
word. Once it is confirmed, press EXIT to exit the Menu.
Restore Factory Default
Setzen Sie Ihre Set Top Box auf Werkseinstellungen zurück. Wählen Sie im Hauptmenü [Restore
Factory Default] und drücken Sie OK oder RECHTS zur Auswahl. Geben Sie Ihr Passwort oder das
Standardpasswort "000000" ein und drücken Sie OK zum Bestätigen. Diese Option wird alle einge-
stellten Kanäle und Einstellungen löschen.
Informationen
View model, hardware and software information.
Recall List
enable or disable Recall list function, which support multi-recall -program switching.
Software Update
select to start software update if USB is connecting and there's a upgrading file.
USB
To access the Menu, press the MENU button and select [USB]. The menu provides options to playback
Music and Photo files, it can support MP3, WMA, JPEG, BMP files, The unit will only support USB device
with FAT and FAT32 file system. It will not support NTFS file system.
Multimedia
if no USB device plugged into it, a warning message „No USB Device is Found" displays, otherwise
you can select the Music or Photo type in this menu and press OK to enter the file browser and select
the file to playback
Photo configure
Slide Time: adjust slide show interval to 1~8 seconds
Slide Mode: adjust slide show effect as mode 0~59 or random.
Aspect Ratio: Keep displays the picture as its original aspect, Discard displays the picture in full screen
mode.
ENGLISH
13