Installation Instructions; Quick Installation Guide - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung
Temperaturfeldtransmitter
Vorschau ausblenden
Andere Handbücher für iTEMP HART TMT162:
- Bedienungsanleitung (160 Seiten) ,
- Betriebsanleitung (120 Seiten) ,
- Kurzanleitung (56 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation instructions
2
Installation instructions
2.1
Quick installation guide
If stable sensors are used, the device can be fitted directly to the sensor. For remote mounting
to a wall or stand pipe, two mounting kits are available (see Fig. 3). The illuminated display can
be mounted in four different positions:
Fig. 1: Temperature field transmitter with sensor, 4 display positions, can be plugged-in in 90° steps
Pos. A: Sensor
1.
Remove the cover clamp (1).
2.
Unscrew the housing cover together with the O-ring (2).
3.
Remove the display with retainer and twist protection (3) from the electronics module (4).
Adjust the display with retainer in 90°stages to the desired position and rearrange it on the
particular slot on the electronics module.
4.
Then screw on the housing cover together with the O-ring. Mount the cover clamp.
20
TMT162 HART
T09-TMT162ZZ-11-00-00-xx-001
Endress+Hauser
Werbung
Kapitel
Inhaltsverzeichnis
