Installation - Novoferm NovoSpeed Flex Montageanleitung

4. Installation

4.1
GB
Determine the location for the base plate by using the profile for the
lintel seal.
NB: CENTERED AGAINST THE MIDDLE OF THE OPENING!
4.2
Determine the number of shims on the basis of the difference between HL and HR.
8
max. 3
4.3
20 Nm
Securing the floor panel for FLOOR FITTINGS.
4.4
Securing the floor panel for WALL FITTINGS.
Leave space for sliding the guide rail over the
floor panel. Tighten the mounting bolts finger tight.
GB
9