Preparing the Walkie−Talkies for Use
Inserting the battery pack
Open the battery compartment cover. Insert the battery pack sup-
plied. Pay attention to correct polarity. Close the battery compart-
ment.
Charging the battery pack
Charge the walkie−talkies in the charging station or individually via
the charging cable for at least 14 hours before using them for the
first time. When the walkie−talkies are inserted correctly in the char-
ging station, the red LEDs light up. They only signal that the con-
nection is correct and continue to light up even when the battery
packs are fully charged.
The battery capacity is indicated in the display by the
Full
The battery pack needs to be recharged as soon as the indicator
flashes in the display and acoustic warning signals are issued.
Caution: Standard rechargeable batteries and power
packs cannot be charged in the charging station. Only use
the battery packs supplied or ones of the same type.
Do not charge the walkie−talkies with charging units from
other manufacturers.
Half empty
Low
Empty
icon.
61