switel WTF 719 Bedienungsanleitung Seite 68

Operating the Walkie−Talkies
Selecting the CTCSS
There are 38 analogue (CTCSS 1 − 38) and 83 digital (DCS 1 − 83)
codes available per channel. It is only possible to communicate
using the walkie−talkies when they are each set to the same chan-
nel and CTCSS/DCS code.
2 x ”
+ or ,, P
or
3 x ”
+ or ,, P
1
CTCSS: Continous Tone Coded Squelch System
= Selective calling
2
DCS: Digital Coded Squelch = Selective calling
68
1 2
/DCS code
The CTCSS/DCS codes are transmitted as inaudible sig-
nals together with the standard voice communication.
When received, the voice communication signal is only
transferred to the loudspeaker when the channel and
CTCSS/DCS code set on the receiver are identical to that
of those received (settings on the transmitter). If, by coinci-
dence, another subscriber is using the same channel and
CTCSS code, change to a free channel together with the
party being called.
An exception here is CTCSS/DCS code 0 (zero). When
this setting is set, all calls made on the channel set can be
heard. In order to participate in the radio communication,
you must set the corresponding CTCSS code.
Activate the programming mode
Select the CTCSS code and confirm
it
Activate the programming mode
Select the DCS code and confirm it