Cleaning And Storing The Instrument; Specifications - Beurer BM 58 Gebrauchsanweisung

The technical alarm is a non-locking alarm and must not be
reset. The signal shown on the display will disappear auto-
matically after about 8 seconds.

10. Cleaning and storing the instrument

• Clean your device and cuff carefully only with a slightly
moistened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer in water,
otherwise liquid can enter it and cause demage.
• When storing the device, make sure that no heavy objects
are placed on top of it. Remove the batteries. The cuff
tube should not have any sharp kinks.

11. Specifications

Model no. BM 58
Measurement Oscillometric, non-invasive blood pres-
method sure measurement on the upper arm
Measurement Cuff pressure 0 – 300 mmHg,
range systolic 60 – 260 mmHg,
diastolic 40 –199 mmHg,
Pulse 40 –180 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 100 mm x W 150 mm x H 58 mm
Weight Approx. 364 g (without batteries)
Cuff size 22 to 30 cm
Permissible oper- +5 °C to +40 °C, ≤ 90 % relative air
ating conditions humidity (non-condensing)
Permissible -20 °C to +55 °C, ≤ 95 % relative air
storage conditions humidity, 800 –1050 hPa ambient pres-
sure
Power supply 4 x 1,5 V
Battery life For approx. 500 measurements,
depending on the blood pressure level
and/or pump pressure
Accessories Cuff, instructions for use, 4 x 1.5 V AAA
batteries, USB cable, storage pouch
Classification Internal supply, IPX0, no AP or APG,
continuous operation, type BF applied
part
Technical information is subject to change without notifica-
tion to allow for updates.
28
AA batteries