Bluetooth Operation; Technical Specifications - Kruger&Matz KM1710 Bedienungsanleitung

Owner's manual
IV. POWER SUPPLY INSTRUCTIONS
1. Before connecting the device to power supply socket, make sure the
voltage indicated on the appliance corresponds to the voltage in the
power supply socket.
2. Connect with the included power adapter to power mains to supply the
device with AC power supply. Switch the power switch to ON to turn
the device on.
3. When recharging, the charging indicator is on; full battery indicator is
on when fully recharged.
4. To protect the battery, fully recharge every time after using up.
5. Turn the unit off if it is not used.
V. OPERATION
1. Turn on the unit, connect to sound source and play.
2. lnsert USB / SD card to read Mp3 tracks. Press MODE/INPUT button to
select USB / SD card source input or FM radio.
3. When using the KARAOKE, please plug your wired microphone cable or
turn on the wireless microphone, and adjust the Mic volume.
VI. BLUETOOTH OPERATION
1. Turn the power on.
2. Press the MODE/INPUT button, until screen displays BLUE, which
means the speaker is in Bluetooth mode.
3. Turn on the Bluetooth function on your phone and search for external
devices.
4. Connect with the speaker. The device will make a sound signifying
successful connection.
VII. TECHNICAL SPECIFICATIONS
• Power: 20 W
• Impedance: 4 Ω
• Input sensitivity: 92 ± 3 dB
• Frequency response: 55 Hz ~ 20 kHz
• S/N ratio: ≥ 71 dB
• Harmonic distortion: ≤ 0,7% (1 W)
• Drive unit: 10" + 1"
15