Using Usb Mode - ECG 29 LED 701 PVR Bedienungsanleitung

Using USB mode

To Access/Quit USB mode
1. Connect an USB device. When USB is connected to the TV, popup window appears.
2. Press SOURCE button to display the input source menu. Press the v/V button to select the USB.
3. Press the ENTER button to enter the USB mode.
4. You may use the input source selection menu to exit from the USB mode.
NOTE:
• Special USB device may be not or well supported.
• USB max. Load: DC5V 500mA.
• In terms of loading capacity, it can not support all models of mobile hard disk. It is recommended to use
low-power mobile hard disk of no more than 500mA current.
The formats supported
The USB function can support the USB device with USB memory.
It can play PHOTO, MUSIC, MOVIE or TEXT fi les.
Photo Format Support: JPEG, BMP, PNG.
Music Format Support: MP3, AAC, M4A.
Movie Format Support: AVI, VOB, DAT, MPEG -1 / MPEG-2 / MPEG-4, TS/TP.
Text Format Support: TXT.
NOTE:
• Special algorithm documents may not be or well be supported by the USB.
• The USB supports the format mentioned above, if the fi le format is not supported, change it to the given
format.
Main Operating Interface
1. Use the b/B button to select PHOTO, MUSIC, MOVIE or TEXT. Press ENTER button enter into sub-menu.
2. Use the arrow buttons and ENTER button to enter the desired disk. Press ENTER to open the folder.
3. Use the arrow buttons to highlight the fi le. Use the ENTER button to mark or unmark a fi le. Press u
button to play the selected fi les. If no fi le is marked, all the fi les in the folder will be played in sequence
after you press u button.
4. Press the INFO button to display the menu screen in playing.
5. Press the x to stop the playing fi les.
6. Press the EXIT button to return to the previous menu screen.
HUDBA
FOTO
FILM TEXT
EN
103