Making The Vacuum Cleaner Ready For Use12 - AEG VAMPYR CE Series Gebrauchsanweisung

Making the Vacuum Cleaner
Ready for Use
The accessories can be connected by pressing
together and turning, and separated by pulling
and turning:
Connect Together the Suction Hose and
Suction Tube.
Firmly connect the suction tube handle to the
suction tube.
Connect the Suction Tubes Together
(depending on model)
Connect the two tubes together.
Adjust the Telescopic Tube
(depending on model)
Push down the button on the tube and adjust
the tube to the desired working position.
12
Connect the Suction Hose
Plug the suction hose connector into the suc-
tion inlet. The connector clips into place and is
free to rotate.
Press the release button and pull out the con-
nector in order to remove the suction hose.
Mains Connection/Cable Rewind
The mains cable is stored in the cable compart-
ment. Pull out the cable and plug into a mains
socket.
Unplug from the mains socket. Press the foot
button, the cable is automatically rewound after
vacuuming.