Axis 262+ Installationsanleitung Seite 5

AXIS 262+ Installation Guide
Set an IP address
To make it accessible on the network, the AXIS 262+ must be assigned an IP address. The
recommended method for setting IP addresses in Windows is AXIS IP Utility. This
application is free and available on the Axis Network Video Product CD supplied with this
product.
Notes:
• A network DHCP server is optional.
• The AXIS 262+ has the default IP address 192.168.0.90
• If setting the IP address fails, check that there is no firewall blocking the operation. If you still
experience problems refer to the NAT traversal section in the User's Manual.
AXIS IP Utility - single device/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually set a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment
(physical subnet) as the AXIS 262+.
Automatic discovery
1. Check that the AXIS 262+ is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the video recorder appears in the window, double-click it to open its home page.
4. See page 7 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your computer is connected
to.
2. Click the button
and IP address for the AXIS 262+. The serial number is located on the product label.
3. Click the Assign button and follow the instructions.
Set IP address using serial number and enter the serial number
Page 5