Operating Hints - Grundig 5101 RDS Serviceanleitung

Operating Hints

Note: This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions the part number of which is indicated in the
relevant spare parts list.
Installing the car radio Refitting the control panel
These operating instructions assume that the
car radio has correctly been installed and
connected by a specialised dealer.
Information about installing the car radio are
to be found at the end of this booklet.
Removing the control panel
First insert the control panel into the latches at
the left in the instrument cut-out.
Then press on the right-hand side of the con-
trol panel until it locks in place.
If it should not be possible to switch the radio
on with the
control panel.
Hold the control panel and push the lock
downwards.
The control panel unlocks and can be remo-
ved.
If the control panel is removed with the radio
switched on, the radio switches off automati-
cally.
Brief Operating Instructions
Amplifier Progamme sources
¢ ¢
Using the rotary knob, you can switch the If you have inserted CDs into the attached CD
car radio on and off, alter the volume, and changer and a cassette into the cassette com-
carry out fader, balance, bass, treble, and partment, you can select the programme
EXPERT settings. source directly.
If, for example, you are listening to a cassette
The currently selected function is indicated in
and switch to CD or radio using the
the display.
button, the cassette unit switches to standby.
The median setting is achieved by pressing
When switching back to cassette, play will be
the button for a longer period (confirmation
continued from where it has been interrupted.
message by sound signal).
Example: bass
¡
Press the B A/FAD button briefly:
RDS – – – TP AF LOUD MONO
CR
DX
BASS88:00
8
You can now alter bass reproduction using
Security
the ¢ ¢ rotary knob.
Immediate median setting for bass reproduc-
So that the "car radio" stays where it is:
tion:
Security LED (flashing).
¡
Press the button until the signal
B A/FAD
Code sticker on the car windows.
sounds.
Coding activated.
Control panel removed.
To select the second function (fader or
balance), press the corresponding button
twice.
Please note
Traffic safety
í
Before making a drive
please familiarise yourself with the various
functions of your car radio.
í
Volume
Operating your radio at high volume while
driving can endanger you and others.
Therefore, always adjust the volume so that
you can still safely hear outside noises (e.g.,
car horns, police and emergency vehicles,
etc.).
"
IO
button, remove and refit the
k
POWER GRUNDIG environment initiative
You must have noticed that we
have completely dispensed with
plastics in the packing material for
this car radio.
All parts are made of cardboard and paper and
can be disposed of within the existing paper
recycling system.
Display
The display provides all important operating
information during radio, cassette, and
CD operation.
In the EXPERT operating level, the EXPERT
settings are indicated.
¡
S OURCE
Numeric buttons
The numeric buttons are required to store
and call up programmes, to store the sound
settings, to search stations with PTY
identification, and to activate and deactivate
the theft protection.
Switching on and off Phone mode with a car telephone
– on the car radio Your car radio is provided with a connector
"
IO
for a car telephone or CB radio.
Press the button.
POWER
– with the ignition /starter switch Mute
of the car, if the car radio was previously
When operating the car telephone or CB radio,
switched off using the ignition/starter the car radio is muted.
switch. The display indicates "MUTE".
Switching on for 1 hour max.
Expert settings
... after you have switched your car radio A great number of possible settings without
off with the ignition/starter switch of your
getting confused.
vehicle:
To make car radio operation as easy as possi-
"
IO
Press the button. ble, numerous settings that you need only
POWER
once or occasionally are located in an additio-
If the ignition/starter switch remains off, the
nal control level (EXPERT).
car radio switches off automatically after
1 hour.
To switch the radio off beforehand:
"
IO
Press the button.
POWER
It is possible to switch the car radio on
repeatedly.
Display
Radio mode Cassette mode
U III U range (VHF). TP "Traffic announcement standby"
TP Only stations/RDS programmes activated.
with "traffic announcements" are LOUD Improved sound quality at low
tuned to. volume level (LOUD).
AF RDS programmes Cr Setting for Cr cassettes.
with alternative frequencies and
RDS – – –
AF change are enabled.
TP AF LOUD MONO
LOUD Improved sound quality at low
DX 88888888
volume level (LOUD).
8
MONO The radio has manually been
switched to mono.
Stereo reception TAPE 1
Upper cassette side.
DX Max. search sensitivity.
TAPE 2 Bottom cassette side.
WIND Cassette is wound.
U III TP AF LOUD MONO CR
DX
88888888
CD mode
8
TP "Traffic announcement standby"
activated.
MW Mediumwave
LOUD Improved sound quality at low
LW Longwave
volume level (LOUD).
LRN
RDS programmes are stored in
the LEARN memory.
RDS – – –
TP AF LOUD MONO
RDS SCAN LEARN memory: manual tuning
to RDS programmes.
DX 88888888
8
Please note
Confirmation of functions
Your car radio has been preset at the factory
so that functions are confirmed by a brief
sound signal.
In the expert control level, you can replace the
sound signal by a brief muting of the loud-
speakers by selecting "BEEP OFF".
CD 1 TO 1 1st CD – 1st track.
TO 1 O 1:15 1st track – elapsed playing time
of 1st track.
CD SCAN Play the 1st track on every CD for
approx. 10 seconds.
CD RND Play the CD's in the magazine in
random order (CD RANDOM).
TR SCAN Play all tracks on the CD for
approx. 10 seconds.
CR
TR RND Play the tracks on the CD in
random order (TRACK RANDOM).
RESET Terminate CD SCAN, CD RND,
TR SCAN or TR RND.
TOO HOT CD changer overheated.
MECHANIC CD changer – mechanical defect.
SURFACE CD incorrectly inserted or
distorted data transfer.
MAGAZINE CD magazine missing or not
locked in place.
NO CD CD magazine empty.
NO CDMMU Data transfer interrupted.
CR