ThermoPro TP-07 Bedienungsanleitung Seite 2

Buttons
1. MODE – Press to select thermometer or timer mode. Press and hold for 2 seconds
to enter Synchronization/Pairing mode.
2. HR – In timer mode, press once to set hour. Press and hold for 2 seconds, the
hours will increase by 10 hours per second. In thermometer mode, press once
to increase the temperature value. Press and hold for 2 seconds, the temperature
value will increase by 10 degrees per second.
3. F/ C/ º º – Press and hold for 2 seconds to turn the receiver ON or OFF. In
thermometer mode, press once to select temperature readings in Celsius or
Fahrenheit.
4. MIN – In timer mode, press once to set minutes. Press and hold for 2 seconds,
the minutes will increase by 10 minutes per second. In thermometer mode,
press once to decrease the temperature value. Press and hold for 2 seconds,
the temperature value will decrease by 10 degrees per second.
5. MEAT – In thermometer mode, press to select meat type, PROG (program),
GBEEF (ground beef), GPOUL (ground poultry), BEEF, VEAL, CHCKE (chicken),
PORK, POULT (poultry), LAMB & FISH. In Timer mode, press to switch between
hour/minute timer to a minute/second timer and back.
6. START/STOP– In timer mode, press to start or stop the timer.
7. TASTE – In thermometer mode, press to select the meat taste level, RARE,
MED RARE, MEDIUM, MED WELL and WELL DONE.
LCD
Thermometer mode
-2-
Transmitter Features
Soft rubber
sleeve
Sensor socket
hole
TX indication led
ºF/ºC/
Wire Stand – Allows you to stand the transmitter on tabletop or it can be reversed
and used as a hanger.
Battery Compartment – holds 2 AAA batteries.
Sensor Socket Hole: plug in for stainless steel probe sensor.
Buttons
ºF/ºC/ – Press and hold for 2 seconds to turn the transmitter ON or OFF. Press once
to select temperature readings in Celsius or Fahrenheit.
Installing Batteries
Open the battery compartment of the receiver and insert two "AAA" batteries with
correct polarity. Open the battery compartment of the transmitter and insert two
"AAA" batteries with correct polarity.
Turn On/Off Unit
Press and hold F/ C/ º º button on the receiver for 2~3 seconds to turn it ON or
OFF.
Press and hold F/ C/ º º button on the transmitter for 2~3 seconds to turn it ON
or OFF.
Synchronize/Pair Transmitter and Receiver
The transmitter and receiver need to be synchronized or paired before using.
There are two ways to do so:
Wire Stand
Battery Compartment
-3-