English; Technical Data - AEG TG340 Gebrauchsanweisung

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Base frame
B. Drip tray
C. Thermostat with mains cable
D. Operating lamp
Picture page 3
BEFORE FIRST USE
1
Before using for the first time remove any stickers on the appliance and clean it thoroughly (see "Cleaning and
care").
Do not use any metal utensils on the grilling surface to prevent damage to the non-stick coating!
GETTING STARTED
2
Insert drip tray (B) in base frame (A). Inserting the heater plate (E) in the base frame (A).
3
Apply a little cooking oil to the surface of the heater plate each time before use with the aid of kitchen paper for
better non-stick properties.
4
Insert the thermostat with mains cable (C) fully in the socket on the appliance. The thermostat can only be fitted
when the heater plate (E) is in the correct location in the base (A).
OPERATING INSTRUCTIONS
5
Connect the mains cable (C) to the socket. Turn the thermostat (C) to the desired setting (1 to 5).
1 = lowest temperature, 5 = highest temperature
The operating lamp (D) on the thermostat is on while the grill is heating up. When the temperature is reached, heat-
ing takes place at intervals to maintain the temperature constant. To switch off the appliance, turn the thermostat to
"OFF".
TIPS AND TRICKS
6
The grill bars (G) are ideal for the preparation of meat, fish and poultry. Fat and juice can fall into the drip tray
through the grill webs. This ensures a healthy, low-fat preparation.
7
The frying surface (F) is ideal for example for the preparation of eggs, ham, mushrooms, tomatoes, onions, etc. It is
also very well suited for keeping food warm.
CLEANING AND CARE
8
Remove the mains plug from the socket. Allow the appliance to cool down. Disassemble the appliance. The heater
plate can only be removed from the base frame after the thermostat has been removed.
9
The heater plate can be cleaned in the dishwasher or manually. Thermostat, drip tray and base frame should be
cleaned with a damp cloth (not safe for dishwasher).
10
Dry all parts thoroughly before reassembling the appliance.
Note that water must not penetrate inside the thermostat under any circumstances!
Never clean under running water or even in rinsing water.
11
Storage: It is best to store the table grill assembled.

TECHNICAL DATA

Mains voltage: 230 V, Power consumption: 2200 W
Enjoy your new AEG product!
www.aeg.com
TG340_Tablegrill_AEG-No-Farsi.indd 4
E. Heater plate (non-stick) with cool touch handles and:
F. Frying surface
G. Grill bars
4
2017-07-11 11:24:16