Zero Point Adjustment; Optional Features And Accessories - WIKA A2G-10 Betriebsanleitung

8. Zero point adjustment / 9. Optional features and accessories

8. Zero point adjustment

In general, the zero point should only be checked and adjusted at zero
pressure.
Mechanical and electrical zero adjustment
If there is a zero point deviation (in depressurised condition), the
mechanical as well as the electrical zero point can be adjusted by
turning the adjustment screw located in the front.

9. Optional features and accessories

Adjustable mark pointer
The adjustable pointer indicates the maximum allowable differential
pressure. It can be adjusted manually to the desired value.
Straight or angled threaded pressure connection
Standard accessories:
3 fixing screws

for wall mounting straight threaded pressure connection G 1/8 for

inner diameter 4 or 6 mm
for panel mounting angled threaded pressure connection G 1/8 for

inner diameter 4 or 6 mm
Measuring hose
Plastic, for inner diameter 4 or 6 mm, length 1 to 3 m
WIKA Operating instructions air2guide Models A2G-10 and A2G-15
GB
9