Personnel Qualification; Labelling, Safety Marks; Product Label - WIKA CPH62I0 Betriebsanleitung

3. Safety

3.4 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to
equipment.
▶
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel who,
based on their technical training, knowledge of measurement and control technology and
on their experience and knowledge of country-specific regulations, current standards and
directives, are capable of carrying out the work described and independently recognising
potential hazards.
Special knowledge for working with instruments for hazardous areas:
The skilled personnel must have knowledge of ignition protection types, regulations and
provisions for equipment in hazardous areas.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.

3.5 Labelling, safety marks

3.5.1 Product label

The operator is obliged to maintain the product label in a legible condition.
Product label for the hand-held pressure indicator
The product label is fixed on the rear of the hand-held.
5
WIKA operating instructions, model CPH62I0
1 Product name
1
2 Approval-related data
3 Article number
2
4 Date of manufacture
3
5 Serial number
4
EN
9