Function Of The Unit; Description; Overview (A) - Rothenberger WALL CUT 6540 Bedienungsanleitung

Cut-off wheel diameter ................................... 230 mm
Depth of cut ................................................... 20 – 65 mm
Width of cut .................................................... 5 – 40 mm
Weight ........................................................... 9.8 kg
Protection class ............................................. II
Noise pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 60745-1:2010.
Vibration total value .............................................................
The vibration level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
3

Function of the Unit

3.1

Description

The WALL CUT 6540 wall slit milling cutter is equipped with a starting current limiter, safety
switch, a protective cover fastener with safety notch and a spindle locking device for quick cut-
off wheel change.
Further performance features include rotatability of the handle, fitted with a carbon brush re-
placement flap and a motor with two coil protection grids offering optimal protection against
abrasive dust.
Simultaneous use of two diamond cut-off wheels allows slits up to a maximum depth of 65 mm,
adjustable for slit widths of 5 – 40 mm, installation channels and cable ducts can be milled ex-
actly down to the last millimetre.
Quick and simple removal of the remaining centre bar using the provided slitting chisel. The vast
cutting performance and dust removal guarantee a fast and clean working result.
3.2 Overview
1 Safety on/off switch
2
Disabling button
3
Mains cable
4 Protective cover with scale
5 Carbon brush replacement flap
6 Connecting piece dust remover
) ............................... 93 dB (A) ¦ K
pA
) ................................. 106 dB (A) ¦ K
WA
ENGLISH
3 dB (A)
pA
3 dB (A)
WA
2 2
4 m/s ¦ K= 1,5m/s
7 Locking lever depth adjustment
8
Additional handle
9
Depth adjustment
10 Rollers
11 Spindle locking device
12 Switch (rotatable handle)
(A)
13