Olympus DS-5500 Bedienungsanleitung Seite 13

Locating a Verbal Comment:
1 When playing back a file, press and
hold the 9 or 0 button.
• The recorder stops for 1 second
when it reaches the Verbal
Comment.
DICT QP Ni
MIKE
029
/ 030
10 56
M s
22 40
M s
Verbal Comment
INDEX
INSERT SPEED
Clearing a Verbal Comment:
1 When playing a Verbal Comment,
press the ERASE button.
2 Press the + button to select
[Clear], then press the OK/MENU
button.
Notes:
• Up to 32 Verbal comments can be
set within a file.
• When a file is locked or set to read-
only, or when the SD card is locked,
Verbal comments cannot be erased.
• When the recorder has been set to
DSS Classic mode, it is not possible
to record Verbal Comments.
Index marks
Index marks can be placed into a file
during recording or playback. Index
marks are used to provide a quick
and easy way to identify important or
significant parts within the file.
Setting an index mark:
1 While the recorder is in recording
mode or in playback mode, press the
F3 (INDEX) button.
• An index number will appear
on the display and the status
indicator light will start flashing.
DICT QP Ni
MIKE
029
/ 030
3 10 56
H M s
Index 01
Set
INSERT SPEED INDEX
Locating an index mark:
1 While playing back a file, press and
hold the 9 or 0 button.
• The recorder stops for 1 second
when it reaches the index mark.
Clearing an index mark:
1 Select a file in which index marks
you want to erase are contained.
2 Press the 9 or 0 button to
select the index mark to erase.
3 While the index number appears
for approximately 2 seconds on the
display, press the ERASE button.
• The index mark is erased.
Notes:
• Up to 32 index marks can be set
within a file.
• When a file is locked or set to read-
only, or when the SD card is locked,
index mark cannot be erased.
• If the recorder has been set to DSS
Classic mode, index marks are
limited to a maximum of 16 for each
file.
How to use the menu
To set each menu item, follow the
steps below.
8 8
1, 3, 5, 7 1, 3, 5, 7 1, 3, 5, 7
2, 4, 6 2, 4, 6 2, 4, 6
1 While the recorder is in stop mode,
press the OK/MENU button.
• The menu will appear on the
display.
Main Menu
File Menu
Rec Menu
LCD/Sound Menu
Device Menu
EXIT
2 Press the + or − button to select
the menu including the item to be
set.
Main Menu
File Menu
Rec Menu
LCD/Sound Menu
Device Menu
EXIT
3 Press the OK/MENU button.
• Setting items in the selected
menu will appear.
4 Press the + or − button to select
the item to be set.
Rec Menu
Mic Sense
Rec Mode
VCVA
BACK EXIT
5 Press the OK/MENU button.
• Settings of the selected item will
appear.
6 Press the + or – button to change
the setting.
Rec Mode
QP
SP
BACK EXIT
• Pressing the 0 button without
pressing the OK/MENU button
will cancel the settings and return
you to the previous screen.
7 Press the OK/MENU button to
complete the setting.
• You will be informed that the
settings have been established
via the screen.
8 Press the F3 (EXIT) button to close
the menu screen.
13