Getting Started - Klarstein 10032113 Anleitung

GETTING STARTED

Before first Use
Press the Upper Plate Release Button to remove the upper Grill Plate and then press the
Lower Plate Release Button to remove the lower Grill Plate. Clean the Grill Plates, the
Drip Cups, and the Scraper/Cleaning Tool in warm, soapy water; rinse and let dry.
These parts may also be washed in an automatic dishwasher. NEVER IMMERSE THE
BASE INTO OR EXPOSE IT TO WATER. Reinsert the upper and lower Grill Plates into
their respective positions before use. See the "Inserting/Changing Plates" subsection
below for detailed instructions.
NOTE: When using the Grill Plates for the first time, spray or apply a thin layer
of cooking oil onto the nonstick surfaces of the Plates with a paper towel in order
to season the nonstick surface. As necessary, reapply a thin layer of cooking oil
throughout the life of the Plates to maintain best nonstick performance.
Place the product on a clean, flat, level, stable, heat-resistant surface with at least 4-6
inches (10-15 cm) of space on all sides to allow adequate air circulation.
1 Closed/Heating Position: The Upper Housing is
closed and rests on the Base. Use this position when
starting/heating the product and when grilling most
foods.
2 Open Position: The Upper Housing is open. Place the
Product in this position when starting to use the Grill
function, and when grilling certain foods in which the
upper Grill Plate is not appropriate, such as pizza
or fish. Lift the Handle until the Upper Housing is at
about a 90°angle.
3 Flat Position: The Upper
Housing is open and level
with the Base, creating two
cooking surfaces. Use the
product in this position when
grilling larger amounts of food.
To flatten, pull up on the Hinge
Release and push the Handle
down.
EN
17