Diode Test; Continuity Test - TESTBOY TB 65 Bedienungsanleitung

Operation

Diode test

Set the selector switch to "
the "COM" jack and the red test lead to the "V/Ω" jack. Connect test
leads to the test specimen. Red test lead = anode, black test lead =
cathode. The forward voltage drop is displayed.
Measuring
range
-
Supply current: approx. 25 µA
-
Overvoltage protection: 250 V RMS

Continuity test

Set to " /
lead to the "COM" jack and the red test lead to the V/Ω/TEMP/CAP
jack. Connect test leads to the test circuit. A signal is emitted if a
resistance under 45 Ω is measured.
Important: Ensure isolation from the power supply
and discharge capacitors in the circuit to be
measured.
Measuring
range
-
Measurement circuit voltage: 3 V
36
Resolution
1 mV
" using the selector switch. Connect the black test
Function
The integrated buzzer signals continuity less
than 45 Ω
/ ". Connect the black test lead to
Display
Forward voltage
®
Testboy TB 65