Switching On And Off; Basic Settings - Silvercrest SKRI 2000 A1 Bedienungshinweise Und Sicherheitshinweise

Handling and operation
Handling and operation
In this section you receive important information for the handling and operation
of the appliance.
Switching On and Off
After connecting the appliance to the mains power supply, it automatically starts
the setting system. In the display
THANKS" appears for about 3 to 5 minutes. Should a signal be received during
this period, the system is updated automatically.
NOTICE
► To cancel this process, press any button.
The system then starts with the following default settings:
■
■
■
■
With connection to the mains power supply, the appliance switches to clock/
standby operation. The appliance can be switched on or off via the button
Power
Using the button Function / ST
control, you can switch back and forth between the modes radio, iPod and AUX.
NOTICE
► The button
completely disconnect the appliance from the mains power supply. The
appliance also consumes power when in standby-mode. To completely
disconnect the appliance from the mains power supply, the power adapter
must be removed from the mains power socket.

Basic settings

After the appliance has been connected to the mains power supply it shows the
time of day and the day of the week in the display
operational mode clock/standby operation.
SKRI 2000 A1
Date/Time
Radio is switched off
Clock mode/Standby operation is active
Display dimmer is active
or the -button
6 30
Power or the
6
the text „PLEASE WAIT FOR SETTING
on the remote control.
or the button Function / ST
7
-button on the remote control do not
30
. The appliance is in the
on the remote
38
15
49
GB