Herunterladen Inhalt Inhalt Diese Seite drucken

Hints On Disposal; Declaration Of Conformity - Klarstein 10031372 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Please check if the water reservoir is flat when the ice shovel can not remove the ice to ice basket. If not, please
push the ice shovel gently by finger, then press POWER button to restart.
Problem
The compressor works
abnormally with a Buzzing
Noise.
Water shortage indicator
light is on.
Indicator lights on display
are not on.
The Ice made is too large
and with pieces sticking
together.
All indicators twinkle
simultaneously.
According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailled information about recycling of this product, please contact your local council or your
household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
11
Possible Cause
The voltage is lower than
recommended.
There is no water.
The pump is full of air.
Blown fuse/ No power.
Water temperature is too
low.
.Ice of previous cycles left
in the water tray.
Water tray is blocked by
ice cube.

Hints on Disposal

Declaration of Conformity

Suggested Solutions
Stop the Ice maker and do not restart until the
voltage is normal.
Add to some water until it reaches MAX position.
Press POWER button to restart.
Replace fuse / Turn power on.
Select small size.
Take out the ice under the standby state.
Unplug the power to take out the ice which
blocking the tray, then plug the power and press
the POWER button, the machine will restart
3mins later.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis