Specifications - AXTON C608 Bedienungsanleitung

I

SPECIFICATIONS

AXTON 5-Channel System Amplifier
Rated power output mono/stereo (at 13.8V)
Satellites (Front+Rear) at 4 Ohms (2 x stereo) min.
Subwoofer (mono) at 4 Ohms min.
Rated power output mono/stereo (at 13.8V)
Satellites (Front+Rear) at 2 Ohms (2 x stereo)
Subwoofer (mono) at 2 Ohms
Frequency response (Sub+Front+Rear)
Total Harmonic Distortion (THD) at 4 Ohms
Signal to noise ratio
Channel separation
Crossover slope highpass and lowpass
Adjustable highpass frequency range
Adjustable lowpass frequency range
Recommended cross-section with 5m powercable
Input impedance
Input sensitivity
Damping factor
Thermal cut-off
Fuse
Recommended main fuse at car battery with 20 mm
Dimensions (W x H x L)
Specifications subject to change without notice.
30
4 x 50 W RMS
1 x 155 W RMS
10 - 30.000 Hz
40 - 240 Hz
40 - 240 Hz
> 250@ 4Ω / 20Hz
power cable
2
256 x 53 x 410 mm
AXTON is a registred trademark of ACR AG, Bohrturmweg 1, CH-5330 Zurzach, Switzerland.
C608
4 x 65 W
1 x 255 W
< 0.05 %
> 95 dB
> 55 dB
12 dB/oct
20 mm
2
47 k Ohms
0.2 - 9 V
85 °C
3 x 25 A
60 A