Kerbl IPCam 2.0 HD Bedienungsanweisung Seite 30

3. Camera setup via PC software
Proceed in the same way as with downloading for smart-
phones and go to the www.kerbl.de/service website.
Click „Download" under the Windows icon.
Run the „app-Smart.exe" file and allow the program
to install. The following icon appears on your desktop
following successful installation:
After double-clicking the icon, the following window
appears:
Recover: Forgotten password and request a new one
Register: New registration (tip: Use your e-mail address
as the account)
After entering the details successfully, the program inter-
face appears. Pressing „+" allows you to add cameras.
Name: Assign a unique name so that you know which ca-
mera you want to control if you have multiple cameras.
UID: Here, you can either enter the camera's unique code
that can be found on a separate sticker or click „Search".
All of the cameras on the network are displayed (see Setup
via smartphone).
Click „Refresh" if not all of the cameras on the network
are listed. Check during initial installation that all of the
cameras are connected with the RJ-45 network cable to
the router or that the cameras were linked correctly to the
WLAN.
Password: For security reasons, change your password
promptly and follow the instructions under „Changing
passwords"
30