Menu - GeoMax Zeta125 Bedienungsanleitung

4 Menu

Access to the
SET UP Menu
Step Description

Notice: The SET UP menu can also be accessed by using the keys on
the remote control. The functions on the remote control are the same
and the lock key
Enter key on the laser keypad.
1. Set the grade of the laser to 0.000% and turn off the laser.
2. Turn the laser on again. The start screen appears and the state of the
battery is displayed.
3.
Press the up arrow key
simultaneously until the SET UP screen
appears.

The active menu step is highlighted and > is
displayed in front of the line.
4.
Press to open the menu option.
Menu
on the remote control corresponds to the
and Enter key
SET UP
>INFO
SETTINGS
CALIBRATION
SERVICE
EXIT
007179_001
Zeta125/ Zeta125s | 45
EN