Heating And Keeping Liquids Warm - Silvercrest SEAD 1800 A1 Bedienungsanleitung

NOTICE
► The time periods specifi ed in the tables refer to the actual cooking time.
The time period begins therefore fi rst when the preserving boiler has
reached the set temperature. With a completely full appliance this can
take up to 90 minutes!
6) Using the control dial "Minutes"
table.
7) Start the appliance by pressing the heating START/STOP
tones sound and the heating begins. Once the heating up is complete, signal
tones sound, "
indicator "Minutes" 5 begins to count down. As soon as the set time period
has expired, signal tones sound. The appliance switches itself off . "
8) Position a heat resistent container under the pouring tap
pouring lever q down. The water drains itself.
9) When the water has drained away allow the preserving jars to cool down.

Heating and keeping liquids warm

WARNING - PROPERTY DAMAGE!
► Fill the appliance with liquids to a maximum level of 4 cm below the
upper edge! If the level is any higher, the liquids could overfl ow!
1) Pour the liquid (for example, mulled wine or cocoa) into the preserving
boiler.
2) Place the lid
WARNING - RISK OF INJURY!
► When it is hot, take hold of the appliance ONLY by means of the heat
insulated handles 2. Risk of Burns!
3) Using the control dial "Temperature"
4) Press the button TIMER
sary to set a cooking time. The appliance heats up continuously until it is
switched off .
5) Regularly stir the liquid so that the heat is evenly distributed.
SEAD 1800 A1
" appears in the display and the time set in the display
" extinguish in the display.
1 onto the preserving boiler.
3. "
3, set the cooking time specifi ed in the
9, set the desired temperature.
" appears in the display. It now not neces-
9 button. Signal
" and "
0 and press the
11
GB
IE