Inhaltsverzeichnis
Werbung
44
*
43
45
201
08
61
TABLE 2 - TABLEAU 2 - TABELLE 2 - TABLA 2 - TAVOLA 2
04
30
52
03
34
02
33
74
75
13
205
56
55
57
45
54
58
59
12
60
78
65
79
77
33
4.1) Thorough cleaning
Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any
residual particles, especially close to pivots and moveable parts.
22
4.2) Storage
(Ref. to Fig. 1)
When not in use, the tool should be stored and transported in the canvas bag, to prevent
damage. Canvas bag (type "009", size 390x390x160 mm (15.35x15.35x6.30 in.), weight
0,6 kg (1.3 lbs).
4.3) Flexible hose
Operate the tool with the hose uncoiled. Do not bend, twist, kink, knot or squash the
hose. Before operation, check the hose for any sign of damage.
72
When storing the tool in the canvas bag, coil the hose in large loops.
5. BLADES CHANGING
The blade may become worn or damaged through prolonged or improper use.
Replace the damaged blade as follows:
67
5.1) Moving blade
– Make sure that the ram (50) is completely retracted. If this is not the case follow the
instructions described in § 2.4.
– With a 6 mm Allen key, remove grub screw (84).
– With a 3 mm Allen key, slacken grub screw (85) until the blade (62) or (89) is free.
72
– Remove the old blade from the head.
53
72
53
– Fully insert the new blade. Ensure that the short side of the blade is positioned at
the front of the head, as illustrated in Fig. 7.
57
– Fully tighten grub screw (85) and fit the security grub screw (84).
58
59
5.2) Fixed blade or blind plate
– With a 4 mm Allen key, remove screw (82) until the blade (63), (90) or the blind plate
(91) is free to be removed.
– Fully insert the new blade and secure with the fixing screw (82).
ATTENTION !
80
Incorrect blade positioning can damage the tool.
6. RETURN TO
Cembre
In the case of a breakdown contact our Area Agent who will advise you on the problem
and give you the necessary instructions on how to dispatch the tool to our nearest service
Centre; if possible, attach a copy of the Test Certificate supplied by Cembre together
with the tool or, if no other references are available, indicate the approximate purchase
date and the tool serial number.
6
23
19
17
70
16
53
72
(Ref. to Fig. 7)
53
70
18
204
70
203
18
21
32
71
47
29
47
26
60
68
69
76
73
14
FOR OVERHAUL
64
ENGLISH
18
70
18
11
23
20
202
05
15
Werbung
Inhaltsverzeichnis
