Symbols Used; Foreseeable Misuse; Basic Safety Information; Intended Use - bürkert 8203 Bedienungsanleitung

symbols used

The following symbols are used in this manual:
DANGER
Warns you against an imminent danger.
• Failure to observe this warning can result in death or in
serious injury.
WARNiNG
Warns you against a potentially dangerous situation.
• Failure to observe this warning can result in serious
injury or even death.
CAUTiON
Warns you against a possible risk.
• Failure to observe this warning can result in substantial
or minor injuries.
NOTE
Warns you against material damage.
advice or important recommendations for your safety
and for the correct operation of the product.
→
indicates a procedure to be carried out.
4
Restraints
Observe any existing restraints when the product is exported.

Foreseeable misuse

• Do not use the pH / Redox probes in an explosive
atmosphere.
• Do not use fluid that is incompatible with the materials of
which the probe is made.

bAsic sAFeTy inFoRmATion

This safety information does not take into account:
• any contingencies or occurences that may arise during
assembly, use and maintenance of the devices.
• the local safety regulations that the operator must ensure
the staff in charge of assembly observe.
danger due to high pressure in the installation.
danger due to high temperatures of the fluid.
danger due to the nature of the fluid.
6
English
English

inTended use

use of the ph/redox probe type 8203 that does not
comply with the instructions could present risks to
people, nearby installations and the environment.
• The probe is used to measure:
- the pH in clean liquids or liquids containing solids,
sulphides or proteins.
- or the oxidation reduction potential in clean liquids
or liquids containing solids, sulphides or proteins
which may present low conductivity.
• This product must be used in compliance with the
characteristics and commissioning and use conditions
specified in the contractual documents and in the user
manual.
• Requirements for safe and proper operation are proper
transport, storage and installation as well as careful
operation and maintenance.
• Only use the product as intended.
English
Various dangerous situations
To avoid injury take care to:
• prevent any power supply switch on.
• carry out the installation and maintenance work by
qualified and skilled staff with the appropriate tools.
• use the device only if in perfect working order and in com-
pliance with the instructions provided in the user manual.
• observe the general technical rules during the planning
and use of the device.
NOTE
chemical compatibility of materials in contact with
the fluid.
• Systematically check the chemical compatibility of the
component materials of the probe and the fluids likely
to come into contact with it (for example: alcohols,
strong or concentrated acids, aldehydes, alkaline
compounds, esters, aliphatic compounds, ketones,
halogenated aromatics or hydrocarbons, oxidants and
chlorinated agents).
English
5
7