Connecting The Cables - Silvercrest SLNB 401 A1 Bedienungsanleitung Und Serviceinformationen

Universal Quad LNB SLNB 401 A1

Connecting the Cables


Only use high-end coaxial cable.

Use a sharp knife to remove 10 mm of the outer insulation from the
cable end. Make sure that the shielding net does not get damaged.

Next move the shielding net around the outer insulation of the cable
end.

Remove 7 mm of the central lead insulation of the cable end. Make
sure that the central lead does not get damaged.

Next rotate and push the F-type connector onto the cable end as
shown in the following figure.
10 - English
Dimensions mm