Product Information; Mode Of Operation; Versions And Variants; Variants - Phoenix Mecano Lambda Colonne Montageanleitung

6.1 Mode of operation

The Lambda Colonne lifting column is a telescope drive for lifting and lowering. The lifting
columns can either be connected individually (Single), in pairs (Twin) or four-fold (Quattro). The
drive is carried out using an installed DC motor.

6.2 Versions and variants

The lifting column is available in two versions.
Version A
F= 2000 N
20 mm/s
Lifting speed

6.2.1 Variants

The following variants are possible.
•
Mono column
up to three lifting columns can be moved on after
another.
•
In pairs or four-fold (synchronous run)
2 or 4 lifting columns can be moved with each other
(synchronously).
The system must be configured together.
Retroactively added columns do not run
synchronically.
Version B
F= 4500 N
8 mm/s
Lifting speed

6. Product information

39