Cleaning Filter / Suction Hole; Cleaning & Replacing The Filter - Moneual HC-600 Benutzerhandbuch

Cleaning & Replacing the Filter
1. Remove the dustbin from the
unit by the knob
4. Wash the dustbin and Pre-
filter with water (Dry the
dustbin and Pre-filter in a
well-ventilated area)
* Clean the filter once every first to third use.
* Replace the filter every 6 months. (depending on the environment or frequency of use)
Cleaning the Suction Hole

Cleaning Filter / Suction Hole

2. S eparate the filter from the
dustbin
5. Brush off the dust from HEPA
filter with enclosed brush
Remove any unwanted materials if the suction
hole is clogged.
* If the suction hole is clogged, suction power is reduced and the
unit makes a noise which can lead to overheating, damage or fire.
* Do not vacuum any sharp objects such as blades, pins and
toothpicks.
* Unscrew the screws and remove the rolling bin to remove un-
wanted objects.
3. S eparate the Pre-filter from
the HEPA filter
6. A ssemble the filter and
dustbin, and return them to
the unit
8