Kärcher VC 5200 Betriebsanleitung Seite 14

Please take notice! Should, while turning
the appliance on, the mains furse tripper
shut off, possibly, other electrical applianc-
es are connected and are operating on the
same electric circuit. Should this be the
case, put the appliance in its lowest power
stage, before turning the appliance on. After-
wards you may select a higher power stage.
Refer to chapter "Technical data" for power
fuse protection.
Description of the Appliance
Please unfold the pages with the dia-
grams!
1 Power cord with plug
2 Suction hose
3 Handle
4 Telescopic suction pipe
5 Adjustable telescopic suction pipe
6 Accessories holder for combi-nozzle
7 Combi-nozzle
8 Change filter indicator
9 Filter bag
10 Cover
11 HEPA filter/ micro activated carbon filter*
12 Carrying handle
13 Stopper
14 Parking holder
15 On/off button with electronic suction
power regulator
16 Floor nozzle
17 Blower filter
18 Turbo nozzle for floors
(only in the delivery scope of VC 5300;
you will find the description of the same
in "Special accessories, Pos.A")
* depending on model
Operations
Figure 1
Lock the suction hose neck in the suction
opening.
Figure 2
To take off, push both lock devices to-
gether and pull the tube.
Figure 3
Join handle and suction pipe together.
Figure 4
Join floor nozzle and suction pipe togeth-
er.
Figure 5
Use the adjustment in order to adjust the
telescopic suction pipe to the length you
wish.
Figure 6
Push the attachment girder over the
comdined nozzle and push onto the tele-
scopic suction pipe.
Figure 7
Hold the power cord at the plug and pull
it out. Insert the mains plug into a socket.
Figure 8
Turn on/off the appliance.
Figure 9
The electronic suction power setting is
done at the on/off button:
- Turn it to MAX; suction power is high
- Turn it to MIN; suction power is low
Start up
English
7