Becker Centronic SunWindControl SWC442 Bedienungsanleitung Seite 19

b) Learning the light function
Press the light controller push button and within 3 seconds the "Learn" key and
keep both buttons pressed until the receiver indicates that the learn process has
been successfully completed.
The learn process is now complete.
2) Learning the master transmitter
a) Put receiver into learn mode
• Switch off the receiver's power supply and reconnect after 5 seconds.
or
• Activate the "Learn" key or the radio-controlled receiver switch.
The receiver will then be in "Learn" mode for 3 minutes.
b) Learn master transmitter
When the receiver is in "Learn" mode, the learn button is to be pressed until the
receiver indicates that the learn process has been successfully completed.
The learn process is now complete.
3) Learning additional transmitters
a) Press the learn button of the master transmitter until acknowledgement is
given by the receiver.
b) Now press the learn button of the new transmitter until acknowledgement is
given by the receiver
c) Then press the learn button of the new transmitter to be learnt once again.
The receiver will indicate when the learn process has been successfully com-
pleted.
The maximum radio range is up to 25 m indoors and up to 350 m in the open.
DE
GB
FR
NL
19