BADU Profi Eco VS Bedienungsanleitung Seite 17

NOTICE
Installing a flow monitor in the circulation line is recommended so
that a failure message can be displayed. A lengthy interruption of
the bath water circulation can be prevented in this way.
NOTICE
The following points must be observed in order to avoid motor
malfunctions:
– The control line should be correctly installed by a specialist.
Assembly parallel to power lines or their load should be
avoided.
– Should the control lines be extended, dangerous voltages
can occur at the digital input. These should be avoided with
isolation.
– The power cables for various inputs should not be connected
to the same supply line.
Default setting:
Speed:
Priming speed:
Priming time:
Speed which can be set:
Priming time which can be set:
External controlling:
Switching behaviour Input "0":
Low
n1
05|2017
1 = 2000 min
2 = 2400 min
3 = 2850 min
= 2850 min
= 5 minutes
1000 – 3000 min
steps)
oFF, 1 – 10 min. (in 1 min.
steps)
oFF
0 cl
Priority
n2
-1
-1
-1
-1
-1 (in 10 min
n3
WG27.50.094-2-P
-1
High
Stop
EN 17