Switching On The Appliance - Nordmende RIL1232A+ Bedienungsanleitung

performance of your fridge.
• Fix the accessories in the fridge during transportation to prevent damage
to accessories.

Switching On the Appliance

• Before switching on, place the appliance on upright position
and wait at least three hours without moving the appliance.
This will give the refrigerant circuit time to settle and operate
efficiently.
• Clean the appliance thoroughly, especially in the interior, before
use (See Cleaning and Maintenance).
• Installation of the appliance and electrical connections must be
carried out by a qualified technician, in accordance with the
Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the
Installation Manual. This product is intended to be used in proper
kitchen units only.
• The appliance must be connected with a properly installed fused socket. Power
supply (AC) and voltage at the operating point must with the details on the name
plate of the appliance (name plate is located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection. If the socket has no
ground contact or the plug does not match, we suggest you to call an authorized
electrician for assistance.
• Manufacturer is not responsible for failure to complete the ground connection as
described in this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after
the appliance starts to cool.
EN - 5 -