Before Your First Treatment; Treatment Areas - Silk'n ReVit Essential H4201 Bedienungsanleitung

6. Before your first treatment

To use your Silk'n ReVit Essential, follow these steps:
EN
1. Remove the device and other components from the box.
2. Plug the adapter cable into the device socket and plug the adapter into
an electrical outlet.
3. Review the recommendations on how to use ReVit Essential on different

treatment areas.

6.1 Treatment areas
We recommend that you start with the low suction mode and move to the
high mode after a few uses. If you have any discomfort, work the treatment
area in low suction mode.
Treatment area
Forehead, cheeks and chin
Eyes and nose
Neck
M
To start with, you may work each area 2-4 times. When your skin
is used to the treatment, you may increase to 4-6 passes.
Recommendations
Move the device over your skin from the centre
outwards and towards the hairline.
Use short upward strokes for the area around
your eyebrows. Avoid the eyelids.
For the nose area, use straight downward strokes
following the curve of the nose and the contour
of the cheekbones.
Use smooth, downward strokes and work the
whole of the neck area.
24