Wlan Module (Option); Connecting To A Wireless Network - Clevo P150HM Ausführliches Benutzerhandbuch

Concise User's Guide

WLAN Module (Option)

Before installing the Wireless LAN driver, use the Fn +
F11 key combination to power ON the WLAN module.
When the Wireless LAN module is powered on, the
LED will be highlighted and the on-screen visual indica-
tor will briefly be displayed.
Intel WLAN
1. Click Option Drivers (button).
2. Click 2.Install WLAN Driver > Yes.
3. Click Next > Next.
4. Click the button to accept the license and click Next.
5. Click Next > Next > Finish.
802.11b/g/n WLAN (Third-Party)
1. Click Option Drivers (button).
2. Click 2.Install WLAN Driver > Yes.
3. Choose the language you prefer and click Next.
4. Click Next > Install.
5. Click Finish to restart the computer.
24 - WLAN Module (Option)

Connecting to a Wireless Network

The operating system is the default setting for Wireless
LAN control in Windows. Make sure the Wireless LAN
module is turned on.
1. Click the taskbar wireless icon
access point to connect to or click to Open Network and
Sharing Center if you do not see a network you want to con-
nect to in the taskbar menu (a list of options will appear allow-
ing setting changes, and creating a new network)
2. You may need to enter a security key for any access point to
which you are trying to connect.
3. Click to selct a network location (e.g. Home, Work or Public).
4. Click "View or change settings in Network and Sharing
Center" to access further options for the connection.
5. Click the taskbar icon to see any currently connected
networks.
6. To disconnect from the wireless network you can click the
taskbar wireless icon , click the active connection and then
click Disconnect (button).
, and then double-click an
.