Audio - Xoro HTL3742w Bedienungsanleitung

INSTALLATION /INITIAL SETUP

Audio

Using the Audio menu
1. Press MENU and then use P+ or P- to select the Audio
menu.
2. Press V+ or ENTER to access the submenu.
3. Use the P+ or P- to choose the Audio Mode, Dynamic
Bass, Voice, AVC, Balance
4. Make the selections and settings as described in the
following chapter.
5. You can exit the menu by pressing the EXIT button.
Basic Operation
1) Audio mode
Press V+ or ENTER to access the Audio mode
Press P+ or P- repeatedly to choose among Surround Music, Surround Movie, Flat, Sports.
Press ENTER or V- to return previous menu
Press MENU to return main menu
2) Dynamic Bass
Dynamic Bass is a bass boost process that can dramatically increase
the bass content of any program without any output level saturation
Press V+ or ENTER to access the Dynamic Bass mode
Press P+ or P- to select Dynamic Bass on/off
Press ENTER or V- to return previous menu
Press MENU to return main menu
3) Voice
Press V+ or ENTER to access the Voice item
Press P+ or P- to select Voice on/off.
Press ENTER to return previous menu.
Press MENU to return main menu
4) AVC
Auto Volume Control: Auto Volume Control optimizes volume levels
across tracks, allowing you to chill out to soft, cool tunes without
bursting your ear-drums when death-metal is played next
Press V+ or ENTER to access the AVC item
Press P+ or P- to select AVC on/off.
Press ENTER to return previous menu.
Press MENU to return main menu
5) Balance
Press V+ or ENTER to access the Balance item
Press V+ or V- repeatedly to adjust the balance between the left and
right audio channel
Press ENTER to return previous menu.
Press MENU to return main menu
30
Surround Music
Surround Movie
Flat
Sports
User
On
.
Off
.