Standard Accessories; Specifications - Hitachi BL 36200 Bedienungsanleitung

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the
accessories listed on page 150.
Standard accessories are subject to change without
notice.

SPECIFICATIONS

Model
Battery capacity
Output voltage
Adapter output
Maximum output current
Output voltage
USB output terminal
Maximum output current
Operating temperature range
Adapter cable length
Large-capacity power dimensions
Large-capacity power
Weight Power adapter
Carrier
NOTE
Due to HITACHI's continuing program of research and development, the specifi cations herein are subject to change
without prior notice.
CHARGING
Charge the back pack power supply before using as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red. (At 1-second intervals)
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. lnsert the adaptor of back pack power supply into
the charger.
Place the back pack power supply in a horizontal
position and turn it on by the switch on the side. Firmly
insert the battery into the charger.
NOTE:
If the pilot lamp of the charger lights in green (high
temperature standby status) when the adaptor is
inserted into the charger, check that the battery status
lamp on the back pack power supply control panel is lit
in red.
If the battery status lamp is OFF, the back pack power
supply switch may be turned OFF.
If the back pack power supply switch is turned OFF,
disconnect the adaptor and turn on the switch before
reinserting the adaptor.
3. Charging
When inserting an adaptor of back pack power supply
in the charger, the pilot lamp will light up continuously
in red.
When the back pack power supply becomes fully
recharged, the pilot lamp will blink in red. (At 1-second
intervals.) (See Table 2)
APPLICATIONS
○ Power Supply for Hitachi Cordless Power Tools (DC 36 V)
○ Power Supply for USB-Connection Equipment (DC 5 V)
Table 1
Li-ion DC 36 V 21 Ah (21000 mAh) 80 cells
330 mm × 250 mm × 109 mm
● Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 2, according to the condition of the charger or
the back pack power supply.
5
English
BL36200
DC 36 V
50 A
DC 5 V
0.5 A
0°C – 40°C
1.5 m
6.3 kg
0.5 kg
1.0 kg