Resetting The Fronius Personal Display Card In The Inverter - Fronius Personal Display DL Bedienungsanleitung

No communication possible between the Fronius Personal Display DL and invert-
ers
Cause:
Remedy:
Card in the inverter.
Resetting the Fro-
1
nius Personal
2
Display Card in
3
the inverter
Only one Fronius Personal Display DL can communicate with
the available system inverters.
When the Fronius Personal Display DL is replaced by a new
one, delete all system inverters from the configuration of the
Fronius Personal Display DL (see "The Setup menu," "DEL
IG").
NOTE! If the available inverters are not deleted from the configuration of the
Fronius Personal Display DL and the previous Fronius Personal Display DL is
no longer available, e.g., due to damage, reset the Fronius Personal Display
Access the 'DATCOM' menu item in the Setup menu
Scroll to the 'PDCD RST' menu item using the arrow keys
Press the 'Enter' key to reset the Fronius Personal Display Card
81