Replacement Of Internal Fuses; Cleaning The Instrument; End Of Life - HT 64 Bedienungsanleitung

5.2.

REPLACEMENT OF INTERNAL FUSES

1. Position the rotary switch to OFF and remove the cables from the input terminals.
2. Turn the fastening screw of the battery compartment cover from position
and remove it (see Fig. 32)
" "
3. Remove the damaged fuse and insert a new fuse of the same type (see § 6.1.2).
4. Restore the battery compartment cover into place and turn the fastening screw from
position to position
" "
5.3.

CLEANING THE INSTRUMENT

Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc.
5.4.

END OF LIFE

WARNING: the symbol on the instrument indicates that the appliance and its
accessories must be collected separately and correctly disposed of.
Fig. 32: Replacement of internal fuses
.
" "
EN - 27
HT64
to position
" "