Working Advice; Maintenance And Service; After-Sales Service And Application Service - Bosch AL 1115 CV Originalbetriebsanleitung

OBJ_DOKU-26846-002.fm Page 10 Wednesday, October 10, 2012 3:18 PM
10 | English
Continuous Lighting of the Battery Charge Indicator 2
Continuous lighting of the battery charge indicator 2 indicates that
the battery is fully charged or that the temperature of the battery is
not within the allowable charging temperature range, and cannot be
charged for this reason. The battery is charged as soon as the allow-
able charging temperature range is reached.
When the battery is not inserted, continuous lighting of the battery charge indicator 2 indi-
cates that the mains plug is inserted in the socket and that the battery charger is ready for
operation.
Troubleshooting Causes and Corrective Measures
–
Cause
Continuous lighting of the battery charge indicator 2
No charging procedure possible
Battery not (properly) inserted
Battery contacts contaminated
Battery pack defective
Battery charge indicator 2 does not light up
Mains plug of battery charger not plugged in
(properly)
Socket outlet, mains cable or battery charger
defective

Working Advice

With continuous or several repetitive charging cycles without interruption, the charger can
warm up. This is not meaningful and does not indicate a technical defect of the battery charg-
er.
A significantly reduced working period after charging indicates that the battery is used and
must be replaced.

Maintenance and Service

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. Exploded views and information on spare parts can also
be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our products and
their accessories.
In all correspondence and spare parts orders, please always include the 10-digit article num-
ber on the type plate of the battery charger.
1 619 929 L64 | (10.10.12)
Corrective Measure
Properly insert battery into battery charger
Clean the battery contacts (e.g. by inserting
and removing the battery several times) or
replace the battery
Replace the battery
Insert mains plug (fully) into the socket outlet
Check the mains voltage; have the battery
charger checked by an authorised after-sales
service agent for Bosch power tools
Bosch Power Tools