Storing Stations In Memory; Fm Station Automatic Preset: Ssm - JVC KD-LX10R Bedienungsanleitung

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
1
1
2
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3). These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
8
1-
2
2
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
1 Press SOURCE (ATT) to select FM as the source.
2 If necessary, press and hold MODE BAND to select
Press and hold both buttons for more than
2 seconds.
"SSM" appears, then disappears when automatic preset is over.
2 1-
1
the FM band number (FM1, FM2 or FM3).
FM1 FM2 FM3