Seca 769 Bedienungsanleitung Seite 15

Correct weighing
– Press the Start key with no load on the
scale.
se(A 8. 8 . 8 . 8 . 8 .
,
cutively in the display. The scale is then
automatically set to zero and ready to
use.
– If necessary, switch the weight display
(see page 15).
– Stand on the scale and keep still.
– Read the weighing result off the digital
display.
– If a load greater than 200 kg or 450 lbs
is placed on the scale,
the display.
– To switch off the scale, press the Start
key again.
Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be-
tween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.
Automatic switch-off/economy mode
The scale automatically detects whether it is being operated on batteries or whether it is
connected to the mains.
– Operation on batteries: automatic shut-down after 30 seconds.
– With mains operation: shut-down only via keypad.
Model 769
0. 0
and appear conse-
St0P
appears in
GB
15