Entering A Dialling Pause; Temporary Tone Dialling; Adjusting The Receiver And Handsfree Volume During A Call; Chain Dialling - switel DCT8572 Bedienungsanleitung

4.11

Entering a dialling pause

A dialling pause can be entered between the number dialled to get an outside
line and the actual phone number to be dialled. After dialling the number for
the outside line, the telephone then waits 3 seconds before dialling the actual
phone number. More information on dialling pauses is provided in Chapter
8.3.
J
4.12

Temporary tone dialling

If you only operate the telephone using the Pulse dialling mode (refer to
Chapter 9.5), you can still make use of the advantages of Tone dialling
mode(e.g.: remote access of the answering machine).
During a call, you can temporarily switch to Tone dialling.
H
When the call is ended, the equipment automatically switches back to Pulse
dialling.
4.13

Adjusting the receiver and handsfree volume during a call

The volume can be adjusted to one of five settings during a call.
I
A or C o to ooooo
4.14

Chain dialling

The chain dialling function is used in more complex telephone services, e.g.
for telephone banking, call-by-call or calling card procedures. The function is
used to transfer numbers stored in the phone book when a connection has
already been made. It is also possible to combine numbers for transfer from
the phone book with numbers entered manually. Numbers stored in the phone
book can be chained and transmitted as required.
D o
M 0 to 9
- Handset Operation -
Press to enter a dialling pause
Press the button during the call
Press the button during the call
Select the volume
Open the phone number memory when a
connection has been made
Enter the number of the memory location
containing the required phone number
123