Descaling The Base Of The Appliance / Water Tank; Cleaning And Maintenance; Service - Silvercrest SDG 800 A1 Bedienungsanleitung

18
Descaling the Base of the
Q
Appliance / Water Tank
ATTENTION! RISK OF INJURY! Always switch
the appliance off and pull the mains
to all occupations with the electrical appliance.
ATTENTION! HAZARD OF BURNS! Let the
steamer completely cool down before descaling it.
D escale the base of the appliance / water
tank regularly in order to maintain the steam
10
generation and to extend the lifespan of the ap-
pliance. The amount of limescale deposit caused
will depend on the water hardness type. Descale
the tank after every seventh to tenth use.
10
Slight and persistent scale:
F or slight scale, use a cloth moistened with
vinegar.
W ipe the scaled areas with it.
U se correspondingly more vinegar for persistent
scale.
T hen rinse and dry the appliance thoroughly.
Descale the base of the appliance /
water tank:
P lace the turbo ring
on the heating element
upwards).
F ill the base of the appliance / water tank
with cold water up to the MAX mark
F ill the inside of the turbo ring
decalcifier.
D o not heat the appliance.
Initial Operation / Cleaning and maintenance / Service
plug prior
18
with the upside down
8
(larger side faces
11
10
.
19
with usual
8
L eave the appliance to descale overnight.
P our the decalcifier out and rinse the appliance
thoroughly.
T hen wipe and dry the appliance thoroughly.

Cleaning and maintenance

Q
ATTENTION! HAZARD OF INJURY!
Always switch the appliance off and pull the mains
plug prior to all occupations with the appliance.
18
ATTENTION! HAZARD OF BURNS!
Let the steamer completely cool down before
cleaning it.
CAUTION! RISK OF DAMAGE TO THE
PRODUCT! Do not use any aggressive cleaning
materials, such as scouring powder, scouring pads,
steel wool, washing soda or bleach. They could
damage the housing surface.
C lean the steamer regularly, best after every use.
D o not at all immerse the appliance in water.
W ipe out the base of the appliance
damp cloth.
C lean all the demountable parts in hot water
with a little detergent using a washing-up brush.
Then rinse all the parts thoroughly and dry
them carefully.

Service

Q
Have your device repaired
at the service centre or by qualified
specialist personnel using original
manufacturer parts only. This will ensure
that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
with a
10
GB 15