Tips for safety:
• In cases of danger, immediately remove the power
plug from the wall socket.
• Use the appliance exclusively for the purposes
described in these operating instructions.
• Always be alert! Always pay attention to what
you are doing and act with common sense. Ne-
ver use the appliance when you are distracted
or don't feel well.
• Ensure that the appliance is correctly and com-
pletely assembled before taking it into use. The
appliance can first be taken into use when the
clamps have been closed.
• After every use of the juice extractor ensure that
the On/Off switch is moved to the position "Off"
("0"). . The motor must come to a complete stop
before you begin to disassemble the appliance.
• Remove the power plug from the wall socket
when the appliance is taken out of use, when
removing components and before cleaning it.
• Do not use the appliance outdoors.
Assembling and operating the
appliance
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
- to the left, the container for fruit pulp and
vegetable mash
s
- to the right, the outlet pipe for the juice
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice catchment bowl
2. Place the filter
3. Place the housing lid
4. Ensure that the housing lid
5. Press the lower part of the claps
6. Slide the container for fruit pulp and vegetable
7. Push the foam separator plate in the separate
8. Insert the power plug
o
,
Preparing the fruits/vegetables
y
.
• Important: Use only well ripened fruit, as other-
• Wash or peel the fruits/vegetables that you wish
• Large seeds or stones should always be removed
- 4 -
Warning:
liance base
, so that the three tenons and the
u
juice outlet
y
are securely caught in the recesses.
d
on the drive shaft
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
e
bowl
, so that the loading shaft
t
ove the cutters of the filter
the recesses of the juice catchment bowl
the clasps
r
and hook them into the notches on
the housing lid
.
e
appliance until they engage.
mash
from below under the ejection shaft.
s
juice collector
h
and then put the lid on. Place
the separate juice collector
ance so that the juice outlet
juice collector
h
.
wise the filter
d
could become quickly blocked.
This would require repeated cleaning of the filter
.
d
to process.
before filling the appliance.
on the app-
t
f
and press
on the juice catchment
is sitting ab-
w
d
.
is sitting firmly in
e
. Lift
t
against the
r
next to the appli-
h
projects into the
y
into the wall socket.
i