Troubleshooting; Malfunction Causes And Remedies - Silvercrest SWW 1500 A1 Bedienungsanleitung

Troubleshooting

Troubleshooting
In this section you will receive important information for malfunction localization
and remedies.
WARNING
Observe the following safety information to avoid danger and property damage:
► Repairs to electronic devices may only be carried out by specialists who
have been trained by the manufacturer. Considerable danger to the con-
sumer and damage to the device can occur as a result of incorrect repairs.

Malfunction causes and remedies

The following table will help with localizing and remedying minor malfunctions:
Defect Possible cause
The mains plug is not inserted.
The device will
not switch on
The mains power socket is not
providing power
The main switch POWER
The device is
not switched on.
not providing
POWER/MODE
heat.
or
The heating element is defective.
In the display
appears
The heating element
the indicator
sively overheated
In the display
appears Malfunction of the integrated
the indicator temperature sensor
NOTICE
► If you cannot solve the problem with the aforementioned methods please
contact customer service.
SWW 1500 A1
3 button and/
has not been activated.
12
9 is exces-
Solution
Insert the plug into the mains power
socket.
Check the house fuses
6 is
Switch on the main switch POWER
Activate the POWER/MODE
and/or button.
12
Get in touch with customer service.
Switch off the device at the main
switch POWER
mains plug.
Allow the device to cool for a few
minutes.
Switch the device off and on at the
main switch POWER
If the indicator continues to appear
get in touch with the customer service
department.
6 .
3
and pull out the
6
6 .
15
GB