General Information; Proper Use - Scheppach AB1500MAX Originalbetriebsanleitung

MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We wish you much joy and success in working with your
new appliance.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non­compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine and
take advantage of its application possibilities in ac-
cordance with the recommendations. The operating
instructions contain important information on how to
operate the machine safely, professionally and eco-
nomically, how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability and service
life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country. Keep the operating instructions package
with the machine at all times and store it in a plastic
cover to protect it from dirt and moisture. Read the
instruction manual each time before operating the
machine and carefully follow its information. The ma-
chine can only be operated by persons who were in-
structed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.
12 І 48
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Layout and items supplied (Fig. 1)
1 Handle
2 On / Off switch
3 Additional handle
4 Chuck locking
5 Tool holder
6 Oil fill opening
7 Maintenance tool
8 Point chisel
9
Flat chisel
10 Grease

General information

• After unpacking, check all parts for possible trans-
portation damages. In the event of complaints, in-
form the supplier immediately. Any complaints made
after this time will not be accepted.
• The shipment is to be checked for completeness
upon receipt.
• Read through the manual carefully in order to make
yourself familiar in dealing with the device before us-
ing it for the first time.
• Only use original equipment regarding accessories,
as well as consumable items and spare parts. Spare
parts can be obtained from your specialized dealer.
When ordering, please specify our part numbers, as
well as type and construction year of the device.

Proper use

• Before starting work, all protective and safety devices
should have been installed on the machine.
• The machine is designed for operation by one per-
son. The operator is responsible for third parties in
the work area.
• Observe all safety and hazard instructions at the ma-
chine.
• The device is designed for heavy demolition and chi-
selling work using an appropriate chisel.
• The machine may be operated only according to its
intended use. Any use other than that intended is im-
proper. It is not the manufacturer but the user / ope-
rator who is liable for any damage or injuries caused.
• Please note that our equipment have not been desi-
gned for use in commercial, trade or industrial appli-
cations. We do not assume any liability if it is used
in commercial, trade or industrial businesses or any
other equivalent activity.
• All safety and hazard instructions at the machine must
be kept in a legible condition.
• Use the machine only in perfect working condition and
according to its intended purpose, as well as adequate
consideration of safety aspects and hazards in com-
pliance with this operating manual. All malfunctions
which might affect safety must be (allowed to be) rec-
tified immediately!
• The safety, work and maintenance instructions of the
manufacturer as well as the dimensions indicated in
the technical data must be followed.
• The relevant accident prevention regulations and
other, generally accepted safety rules must be follo-
wed.
• The machine may be used, serviced or repaired only