Configuring Date/Time Settings; Configuring Source Settings; Configuring Satellite Settings - Schaub Lorenz 46LE-D6900CT Bedienungsanleitung

Configuring Date/Time Settings

Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
• Use " " or " " buttons to highlight Date/Time.
Date, Time, Time Settings Mode and Time Zone
Setting will be available.
Use " " or " " buttons to highlight the Time Settings
Mode. Time Settings Mode is set using " " or " "
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
• Changes are automatically stored. Press "
to exit.

Configuring Source Settings

You can enables or disable selected source options.
The TV will not switch to the disabled source options
when "SOURCE" button is pressed.
• Select Sources in the Settings menu and press
OK button.
• Press" " or " " buttons to select a source.
• Use " " or " " button to enable or disable the
selected source. Changes are automatically
stored.

Configuring Satellite Settings

Select Satellite settings in the Settings menu to
configure satellite settings. Press OK button.
Satellite List: To view available satellite list, please
select Satellite list option from satellite settings menu.
If you want to add new satellite information, please
press YELLOW button. If you want to change satellite
name, please use the navigation buttons. To delete
a satellite from list, press BLUE button or press OK
to edit.
Antenna Installation: In this section, you can
change antenna settings and scan satellite for new
channels.
SatcoDX (optional): You can perform SatcoDX
MENU"
operations using the Satelite Settings. On SatcoDX
menu, there are two options regarding to satcodx
feature as in the following:
You can download or upload satcoDX data. In order
to perform these functions supported for satcodx
feature, a USB device must be connected to the TV
in the first place.
You will be able to upload current services and related
satellites & transponders in TV, to a USB device with
a file named "mb70_sdx.sdx ".
In addition to the uploading feature you will be
able to download one of the satcodx files stored in
USB device, to the TV. When download option is
selected, a list of satcodx files stored in USB device
will displayed.
English - 80 -