Bosch GTS 10 J Professional Originalbetriebsanleitung Seite 39

OBJ_BUCH-1325-001.book Page 39 Saturday, January 22, 2011 12:54 PM
20 Safety flap of On/Off switch
21 Allen key (5 mm)
22 Ring spanner (23 mm)
23 Push stick
24 Insert plate
25 Riving knife
26 Saw blade
27 Lens
28 Profile rail
29 Cable holder
30 Retaining bracket for storage of the auxiliary
parallel guide
31 Sawdust ejector
32 Extraction adapter
33 Fixture for storage of the blade guard
34 Insert-plate notches
35 Clamping handle of the parallel guide
36 V-guide groove of parallel guide
37 Auxiliary parallel guide
38 "Auxiliary parallel guide" fastening kit
39 Guide rail of the angle stop
40 "Profile rail "fastening kit
41 Fastening screw for sawdust ejector
42 Clamping nut
43 Spindle lock lever
44 Clamping flange
45 Tool spindle
46 Mounting flange
47 Indicator for bevel angle
48 Scale for bevel angle
49 Locking knob for various mitre angles
Bosch Power Tools
50 Angle indicator on the angle guide
51 Saw-table clearance indicator
52 ON button
53 Knurled nut for profile rail
54 Phillips screw for adjustment of stop 55
55 Stop for 0° mitre angle
56 Screw for bevel angle indicator
57 Phillips screw for adjustment of stop 58
58 Stop for 45° mitre angle
59 Front Allen screws (5 mm) for parallelism
adjustment of the saw blade
60 Rear Allen screws (5 mm) for parallelism
adjustment of the saw blade
61 Screw for saw-table clearance indicator
62 Screw for parallel guide clearance indicator
63 Adjusting screws for insert plate
64 Allen key (2 mm)
65 Holder for storage of "auxilliary parallel
guide fastening kit"
66 Retaining clamp for storage of the
extraction adapter
67 Fastening nut for the ring spanner and for
attaching the push stick
68 Holder for storage of the Allen key
69 Retaining clamp for storage of the angle
stop
* depending on country version
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 X56 | (22.1.11)
English | 39